a-TroniX AX 3.0kW Single Phase Hybrid Inverter and 5.76kWh Solar Storage Kit

a-TroniX AX 3.0kW-1ph hybrid inverter and 5.76kWh storage

The AX 3.0kW-1ph is a hybrid inverter from a-Tronix. With a hybrid inverter, the electricity produced in the solar system can be temporarily stored. This ensures increased self-consumption of solar power.

The advantages of your new hybrid inverter

The maximum output power of the inverter is 3,000W. The device is compatible with a photovoltaic system with a maximum size of 6kWp. The maximum efficiency of the inverter is 97.1%. Under typical weather conditions in Europe, the hybrid inverter achieves a European efficiency of 95.26%.

Smart inverter for your needs

The hybrid inverter contains 2 MPP trackers. The smart meter is already included and does not need to be purchased.

Black start capability: Powered even in the event of a power failure

The inverter is capable of black start. In the event of a power failure, the phases or consumers connected to the backup power continue to be supplied with power from the PV system or the connected storage system. The black start function requires an a-Tronix AX 2.88kWh high-voltage solar storage with BMS and two a-Tronix AX 2.88kWh high-voltage solar storage.

The a-TroniX AX 3.0kW-1ph scores with these interfaces

The a-TroniX AX 3.0kW-1ph inverter has these interfaces:

• 2x RS485
• DRM
• Ripple Control
• USB

The matching smart meter and the WiFi dongle are included in the scope of delivery.

a-Tronix AX 2.88kWh high-voltage solar storage with BMS

The a-Tronix AX 2.88kWh high-voltage solar storage with BMS forms the basis of the a-Tronix AX system. The battery management system ensures intelligent control of the battery modules.

Performance

The output of the a-Tronix AX 2.88kWh solar storage is 2.88 kWh. A maximum of one 2.88kWh high-voltage solar storage system with BMS and up to six AX 2.88kWh high-voltage battery modules can be combined with each other. This enables storage sizes from 5.76 kWh to 20.16 kWh.

Installation

The installation is easy via Plug&Play: The modules are stacked on top of each other and thus enable quick assembly.

a-Tronix AX 2.88kWh high-voltage solar storage

The a-Tronix AX 2.88kWh high-voltage solar storage impresses with an output of 2.88 kWh. It must be connected to an AX 2.88kWh high-voltage battery with BMS.

Performance

The output of the a-Tronix AX 2.88kWh high-voltage solar storage is 2.88 kWh. Depending on requirements, one to six AX 2.88kWh high-voltage battery modules can be combined with an AX 2.88kWh high-voltage solar storage system with BMS. This enables storage sizes from 5.76 kWh to 20.16 kWh.

Installation

The installation is easy via Plug&Play: The modules are stacked on top of each other and thus enable quick assembly.

Scope of delivery:
1x a-TroniX AX 3.0kW-1ph hybrid inverter
1x a-Tronix AX 2.88kWh high-voltage solar storage with BMS
1x a-Tronix AX 2.88kWh high-voltage solar storage system