Victron SmartSolar MPPT 250/60MC4 SCC125060321

The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged. 

Features of the - Victron SmartSolar MPPT 250V/60A - MC4

Bluetooth Smart built-in 

The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers. 

Ultra-fast Maximum Power Point Tracking (MPPT) 

Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. 

Advanced Maximum Power Point Detection in case of partial shading conditions 

If partial shading occurs, two or more maximum power points (MPP) may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP. 

Outstanding conversion efficiency 

No cooling fan. Maximum efficiency exceeds 98%. 

Flexible charge algorithm 

Fully programmable charge algorithm (see the software page on Victron), and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details). 

Extensive electronic protection 

Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection. 

Internal temperature sensor 

Compensates absorption and float charge voltage for temperature. 

Optional external battery voltage, temperature and current sensing via Bluetooth 

A Smart Battery Sense, a BMV-712 Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature (and current, in case of a BMV 712 or a SmartShunt) to one or more SmartSolar Charge Controllers. 

Synchronized parallel charging with Bluetooth 

Up to 10 units can be synchronized with Bluetooth. 

Fully discharged battery recovery function 

Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function. 

VE.Direct 

For a wired data connection to a Color Control GX, other GX products, PC or other devices 

Remote on-off 

To connect for example to a VE.BUS BMS. 

Programmable relay 

Can be programmed to trip on an alarm, or other events. 

Optional: SmartSolar pluggable LCD display Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display.