Only in the presence of an auxiliary car is it possible to jump start the car. Any car is OK as long as it is roughly the same size as yours. It's crucial to use jumper cables to start the car without triggering a short circuit. See the steps below. Do you want to learn more about whether it's possible to charge a car battery while it's stationary? Also check out this blog to see whether this is feasible!
Connecting car jumper cables
Connecting these jumper cables is the first step in starting the car with cables. That is why it is critical to keep jumper cables on hand at all times. You can't just assume that someone else is driving around with something like this.
1. Find a suitable auxiliary car
It is only possible to start a car with jumper cables if an auxiliary vehicle is available. Speak with someone who owns a vehicle similar to yours. If you own a Ford Mondeo, you should not look for someone who owns a Fiat Panda to help start your vehicle.
2. Switch off the vehicle's engine and electronics
Everything must be turned off if you want to start the car with jumper cables without causing a short circuit. This means you turn off not only the engine but also the radio and all electronics. Remove the key from the ignition to be certain. Of course, the auxiliary vehicle's engine must also be turned off.
3. Open the bonnet of both cars
Both your own and the auxiliary car's bonnet must be open. If you don't know how to open the bonnet, consult the instruction manual, which is usually kept in the glove compartment.
4. Connecting the red jump lead
To start the car with cables, connect the red jumper cable first. This is also known as the plus cable. Go to the rescue vehicle. Place the red cable with the clip on the battery's plus side. Connect the red cable to your own battery as well. On the plus side, you repeat the process.
5. Connecting the black jumper cable
Repeat with the black jumper cable. Connect this to the negative side of the auxiliary vehicle's battery first, then to your own vehicle. Only then can the car be started using cables.
6. Start the emergency car and the breakdown car
Starting the car with jumper cable? Then it is now important that the emergency vehicle is started. Then you start the breakdown vehicle.
7. Turn on the blower and rear defogger
Starting a car with jumper cables only works if both cars' blowers and rear defoggers are turned on. This prevents electronic damage from occurring when the cables are disconnected.
8. Disconnect jumper cables
For 5 minutes, run both motors. After that, you can remove the jumper cables. This is always done in reverse order. So, first disconnect the black cable from your own vehicle, and then disconnect the black cable from the auxiliary vehicle. Then came the red cable from the own car, followed by the red cable from the auxiliary car.
9. Another 20 minutes of driving around
Were the jumper cables useful in starting the car? It is critical that the battery charge sufficiently. As a result, we recommend that you drive your vehilce for at least 20 minutes or charge this battery completely using an external charger like these ones.
It is also wise to keep a Battery Starting Aid also called a booster in your car, justr in case yo ucan find anyone to help you. Check of the popular boosters here.
If the battery runs out before the next start, it must be replaced.
