Our customers love us
Buy Now, Pay Later
Largest premium product selection
Next Day Delivery available!

230W Solar Kit for Lithium and leisure batteries


Prices incl. VAT. Delivery information


Same Day Dispatch when you order before 3pm

  • 70063
  • 17,00 kg
230W Solar Kit for Lithium and leisure batteries Victron Energy SmartSolar MPPT 100/20 (up...more

230W Solar Kit for Lithium and leisure batteries

Victron Energy SmartSolar MPPT 100/20 (up to 48V) Retail SCC110020160R

A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.

MPPT: Ultra Fast Maximum Power Point Tracking

By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing.

Remote Monitoring and Control

Remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in bluetooth by pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both services are free to use. For remote installations – even when there is no internet connection or phone signal nearby – you may be able to monitor your MPPT by bluetooth-pairing with a LoRaWAN (long-range wide area network) device, available optionally.

Load output

The intelligent Load output function prevents damage caused by running batteries ‘flat’. You can configure the voltage at which SmartSolar disconnects a load – thereby preventing excessive drain on your batteries. And here’s the clever bit: SmartSolar will attempt a 100% recharge every day. If it can’t – during periods of poor weather – it raises the disconnect voltage, daily, until it achieves success. We call this feature BatteryLife because it maintains the health, and extends the life of your battery.

Bluetooth Smart built-in

The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.


For a wired data connection to a Color Control GX, other GX products, PC or other devices

Battery Life: intelligent battery management

When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards, the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week.

Internal temperature sensor

Compensates absorption and float charge voltage for temperature.

Optional external battery voltage and temperature sensing via Bluetooth

A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers.

Brand: Victron Energy
Maximum efficiency (%): 98
Battery Voltage: 48V
Rated Charge Current: 20A
Nominal PV Power, 12V: 290W
Nominal PV Power, 24V: 580W
Nominal PV Power, 48V: 1160W
Maximum PV Open Circuit Voltage: 100V
Charge Algorithm: Multi-stage adaptive
Weight kg: 0.65
Dimensions: H100 x W113 x D60mm
IP (Ingress Protection) rating: : IP22 (connection area), IP43 (electronic components)
Data Communication Port: VE.Direct
Warranty: 5 Years
Read, write and discuss reviews...more
Customer evaluation for "230W Solar Kit for Lithium and leisure batteries"
Write an evaluation
Please enter these characters in the following text field.

The fields marked with * are required.

Victron Energy Solar Panel 115W – 12V Mono series 4a – SPM041151200 Low voltage-temperature...
"Solar panel specifications"

Victron Energy Solar Panel 115W – 12V Mono series 4a – SPM041151200

  • Low voltage-temperature coefficient enhances high-temperature operation.
  • Exceptional low-light performance and high sensitivity to light across the entire solar spectrum.
  • 25-Year limited warranty on power output and performance.
  • 5-Year limited warranty on materials and workmanship.
  • Sealed, waterproof, multi-functional junction box gives high level of safety.
  • High performance bypass diodes minimize the power drop caused by shade.
  • Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high voltage operation.
  • A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems.
  • Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.
  • High power models with pre-wired quick-connect system with MC4 (PV-ST01) connectors.


  • Manufacturer: Victron Energy
  • Part Number: SPM041151200
  • Weight: 8kg
  • Length: 1015mm
  • Width: 668mm
  • Height: 30mm
  • Cell Type: Monocrystalline
  • Number of cells in series: 36
  • Nominal Power (PMPP): 115W
  • Max-Power Voltage (VMPP): 19.0V
  • Max-Power Current (IMPP): 6.04A
  • Open-Circuit Voltage (VOC): 23.32V
  • Short-Circuit Voltage (ISC): 6.61A
  • Temperature Range: -40°c to +85°c
  • Length of cables / connector type: 900mm MC4
  • Warranty: 5 Years