Ultimate Diesel Car Additive Protection Kit

DIESEL PARTICULATE FILTER PROTECTOR

DPF Protector

For diesel vehicles with diesel particulate filter if these are not fitted with an electronically controlled additive tank system for filter regeneration such as Citroën and Peugeot. Contents sufficient for 50 – 70 L of diesel fuel.

Ensures optimum combustion of the fuel, reduces soot formation, lowers emissions and extends the service life of diesel particulate filters. Vehicles used for short trips and city traffic are especially affected by clogged diesel particulate filters. Regular use keeps the diesel particulate filter clean, avoiding expensive repairs and downtimes.

Add to the fuel every 2,000 km just before filling up. Contents sufficient for 50 – 70 l of diesel fuel.
Note: Avoid overdosing as well as application in combination with Diesel Soot Stop!

Liqui Moly Super Diesel Additive 1806 - 250ml

Suitable for all diesel engines with and without a diesel particulate filter. Preventive or remedial. Fully compatible with all conventional diesel and biodiesel fuels. 250ml is sufficient for up to 75l of fuel (dosage 1:300). Effect remains for up to 2,000km. Tested for compatibility with turbochargers. Removes deposits in the diesel injection system and in the combustion chamber and prevents new deposits. Maintains all components of the diesel injection system. Prevents any seizing up and gumming up of nozzle needles. Boosts the cetane number, improves the ignition performance of the diesel fuel and ensures smooth engine running. Protects the entire fuel system against corrosion and wear. Optimizes the emission test values and the performance of the engine. Clean engines use less fuel and reduce the pollutant emissions. A combination of agents which cleans, disperses, protects materials and boosts the cetane number. The lubricity enhancer contained provides sufficient lubricity for diesel fuels low in sulphur. Due to the increased ignition performance, the fuel shows better combustion behaviour when the engine is cold and unpleasant odours in the exhaust gases are reduced.

Application:

The increase in ignition performance and improvement of the lubricating effect by lubricity enhancers is achieved by adding the product to low-sulphur diesel fuels on a continual basis. One 250ml can is sufficient for 75l of diesel fuel. Dosage: 1:300.

Clean injectors and corrosion protection by adding to the diesel tank every 2,000km.

5l canisters and 50l drums for trucks, transport companies, bus companies and industry. The dosage rate is in the proportion 1:300 additive to diesel fuel.

When decommissioning and preserving engines, add to the diesel fuel at a rate of 1 %. Follow the instructions on preservation.

Can be mixed with fuel at any time since mixing takes place automatically.

Liqui Moly Pro-Line Diesel System Cleaner 5156 - 500ml

Suitable for all diesel and turbocharged diesel engines with and without diesel particulate filter (DPF). Contents are sufficient for max. 70 l of fuel. Reduces pollutant emissions, thus optimizing smoke opacity prior to emissions test. Successfully tested in international test bench analyses. Cleans injection nozzles, the entire fuel system and combustion chambers of any troublesome deposits. Prevents any seizing up and gumming up of nozzle needles. Optimizes the combustion process and restores the engine's original performance.

Application:

To be added directly into the fuel tank. For preventive use during every inspection, after repairs to the fuel system, for treating problems or after every Jet Clean cleaning. To eliminate problems, we recommend mixing the product with the fuel during refuelling over approximately 2,000km. Contents are sufficient for max. 70l of fuel.

Liqui Moly Speed Tec Diesel 3722 - 250ml

Liqui Moly Speed Tec Diesel is a new diesel fuel additive for combustion improvement and the faster acceleration associated with it, above all in partial load range. Fully compatible with all conventional diesel and biodiesel fuels. Speed Tec Diesel considerably improves vehicle acceleration.

Features of the Liqui Moly Speed Tec Diesel:

• Improves the acceleration
• contains no organometallic compounds
• reduces frictional losses
• cleans the injection system
• better drivability
• suitable for diesel particulate filters
• tested for the use with catalytic converters
• higher performance gain
• does not influence the cetane number
• One 250 ml can is sufficient for max. 70 litres of diesel fuel

How to use the Liqui Moly Speed Tec Diesel Additive:

• Add the contents of the can to your fuel tank (see picture above)
• Mixing will take place automatically