Victron Energy IMPULSE S12 12/24V-12A 220.127.116.110
Prices incl. VAT. Delivery information
*Next Working Day delivery available (Mon-Fri)
- Product ID: 69000
- Weight: 1,00 kg
- Price Challenge Guarantee
- *Next Day Delivery available in the UK
- +3000 Batteries & Accessories
Adaptive 4-stage charge algorithm: bulk – absorption – float – storage
The Impulse II charger features a microprocessor controlled ‘adaptive’ battery management system. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used.
Storage mode: less maintenance and aging when the battery is not in use
The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2V/cell (26,4V for a 24V battery) to minimize corrosion of the positive plates and loss of liquid due to gassing. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, a major cause of early battery failure.
Protected against overheating
Output current will reduce as ambient temperature increases up to more than 30°C, but the charger will not be disabled.
Two LED’s for status indication
Red LED: bulk, absorption Green LED: float, storage en repeated absorption (refresh) Both LEDs flashing: connected with reverse polarity, short circuit, over voltage
Adjustable en readable (Smart version)
The Impulse II Smart is equipped with Bluetooth Smart wireless communication. With this you can get a read out of the state and settings can be changed with a smart phone, tablet or laptop.
|Voltage:||230 Vac - 50/60 Hz - 1-phase|
|Protective Devices:||Protect against overvoltage, Protected against high temperature, Protected against reversed polarity|
|Efficiency :||Min. 80% (at full load)|
|IP (Ingress Protection) rating: :||IP 21|
|Compatible Battery Technologies:||AGM, Gel, Wet, Yellow Top|